Refrigeration Tools

Refrigeration tools are used in performing preventive maintenance and repair on air conditioners, refrigerators, freezers, and automotive air conditioner.

Vacuum Pump

Vacuum Pump

A Vacuum Pump is a device that removes gas molecules from a sealed container in order to leave behind a partial vacuum.

Available Brands

JB Industries| Robinair | Uniweld | Value

Air Flow Meter

Air Flow Meter

Air Velocity Meters measure air velocity, air speed and air pressure.

Available Brands

Fieldpiece | SPX | Supco

Capacitor Tester

Capacitor Tester

Capacitor Testers are designed to identify internal problems with a capacitor or capacitor bank. The testers will identify capacitors that may be damaged or faulty.

Available Brands

Supco

Charging Hose

Charging Hose

A rubber hose used for charging refrigerants to a system.

Available Brands

Aruki | CPS | Proex | Refco |Uniweld

Charging Scale

Charging Scale

The Charging Scale accurately and reliably weighs refrigerant tanks during charging and recovery operations.

Available Brands

CPS | Fieldpiece | Value

Clampmeter

Clampmeter

The Clamp Meter is an electrical meter with an integral AC current clamp. This allows properties of the electric current in the conductor to be measured.

Available Brands

Fieldpiece | Sanwa | Supco

Data Logger

Data Logger

A data logger is an electronic device that records data over time or in relation to location either with a built in instrument or sensor or via external instruments and sensors.

Available Brands

Supco | Dixell | Fieldpiece

Digital Manifold

Digital Manifold

Through the use of a Digital Manifold,  pressures and temperatures can be loaded, adjusted, tested and monitored.

Available Brands

Fieldpiece | Value

Fin Comb

Fin Comb

The Fin Comb is designed to straighten evaporator and condenser fins. The tool also cleans dirt and dust to help prevent overflows.

Available Brands

Proex

Flaring Tools

Flaring Tools

A Flaring Tool is a refrigeration tool use to spread the copper end outward until a flare is formed.

Available Brands

Proex | Value

Hygrometer

Hygrometer

A hygrometer is an instrument used to measure relative humidity.

Available Brands

Supco

Infrared/Pocket Thermometer

Infrared/Pocket Thermometer

An infrared thermometer is a non-contact temperature measurement device.

Pocket Thermometers are ideal for laboratory, field, and process measurements. They are used to quickly verify temperature.

Available Brands

CPS | Fieldpiece | Supco

Manifold Gauge

Manifold Gauge

The manifold gauge is used to measure refrigerant pressures when refrigerant and oil are added or removed from an air conditioning system.

Available Brands

Aruki | CPS | Proex | Refco | Uniweld | Value

Manometer

Manometer

A manometer is a device to measure pressures.

Available Brands

Fieldpiece

Multitester

Multitester

A Multi Tester is a device which can be used to gather data about electrical circuits. It can measure resistance, voltage, and continuity, while more advanced versions may be able to provide additional data.

Available Brands

Fieldpiece | Sanwa

Oil Pump Charger

Oil Pump Charger

Oil Charging Pumps are valuable tools for adding or removing oil in refrigeration and air conditioning systems.

Available Brands

Refco | Robinair (SPX)

Pressure Gauge

Pressure Gauge

Pressure Gauges are used to measure pressures. There are several types varying from pressure range, sensitivity, and dynamic response.

Available Brands

Aruki | CPS | ProexRefco | Robinair | Uniweld

Pressure Gauge w/ Oil

Pressure Gauge w/ Oil

Liquid filled gauge have better protection against vibration, pulsation, corrosion, and moisture makes for a long-lasting, reliable instrument.

Available Brands

Refco | Proex

Oxy Acetylene

Oxy Acetylene

Oxy Acetylene is used for oxyacetylene welding, a processes that use fuel gases and oxygen to weld and cut metals.

Available Brands

Harris | Uniweld

Pinch Off

Pinch Off

The Pinch Off  is used to pinch the radiator hose, enabling  work to be done  on a cooling system without the need to drain all its fluids.

Available Brands

Proex

R410a Adaptor

R410a Adaptor

To allow the usage of a standard charging hose for a system that uses a different size of fitting.

Available Brands

Uniweld

Ratchet

Ratchet

The Ratchet is a wrench with interchangeable sockets, allowing it to turn different sized bolts and other fasteners.

Available Brands

Proex

Recovery Machine

Recovery Machine

A Recovery Machine is a device which can be used to remove refrigerant from a cooling system such as a freezer, refrigerator, or air conditioning system.

Available Brands

CPS | Robinair | Value

Recycling Machine

Recycling Machine

A Recycling Machine removes oil and other impurities from the refrigerant, filtering it and then recycling it back to the tank.

Available Brands

Value

Refrigerant Identifier

Refrigerant Identifier

A refrigerant identifier is used to identify unknown refrigerants, protecting your A/C service equipment.

Available Brands

Robinaire

Superheat and Subcooling

Superheat and Subcooling

A device that measures subcooling (the state of the refrigerant when it is cooled below its boiling point) and superheat (the state when the refrigerant is heated above its boiling point).

Available Brands

Fieldpiece

Swagging Tools

Swagging Tools

Swagging Tools are used to expand the inside diameter of a copper tube so that the resulting diameter is the same as the outside diameter.

Available Brands

Proex

Leak Detector

Leak Detector

Leak Detector enables a user to determine all CFC,HCFC, HFC leaks.

Available Brands

Robinaire | Fieldpiece

Torch

Torch

Hand held or machine torch used for cutting metal.

Available Brands

Harris | TurboTorch | Uniweld

Tuber Cutter

Tuber Cutter

The Tube Cutter is used to cut pipes in a more faster, cleaner and  convenient manner.

Available Brands

Proex | Robinaire | Value

Drill

Drill

A hand tool with a rotating chuck driven by an electric motor and designed to take an assortment of tools for drilling.

Available Brands

Bosch

Torch

Torch

Hand held or machine torch used for cutting metal.

Available Brands

Bosch

Rotary Hammer

Rotary Hammer

A hammer drill, also known as a “rotary hammer”, “roto-drill” or “hammering drill”, is a rotary drill with a hammering action. The hammering action provides a short, rapid hammer thrust to pulverize relatively brittle material and provide quicker drilling with less effort.

Available Brands

Bosch

Pressure Washer

Pressure Washer

A pressure washer or power washer is a high-pressure mechanical sprayer used to remove loose paint, mold, grime, dust, mud, and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces.

Available Brands

Bosch

Condensate Pump

Condensate Pump

A condensate pump is a specific type of pump used to pump the condensate (water) produced in an HVAC (heating or cooling), refrigeration,condensing boiler furnace or steam system.

Available Brands

Sungshin

Steam Cleaner

Steam Cleaner

A steam pressure washer is high pressure mechanical sprayer that releases steam to clean engines, transmissions, drive trains, and other equipment prior to performing service and maintenance work.

Available Brands

Sungshin

Anti Blowback Adaptor

Anti Blowback Adaptor

Uniweld EZAB90 EZ Turn Anti-Blowback Adaptor is a 90° adaptor with a ¼” male fitting on one end and a ¼” female fitting on the other end to connect to any hose. The EZ Turn Anti-Blowback Fitting has a thrust bearing that reduces friction so the service hose can be easily connected to the access fitting while under pressure. The compact design fits in tight work spaces and the deep square knurling and textured orange and blue band allow for easy fingertip control. It is rated for R-410A, CFC, HCFC & HFC refrigerants.

Available Brands

Uniweld

Quick Coupler Adapter

Quick Coupler Adapter

Quick couplers are quick-disconnect fittings used in a hydraulic or pneumatic system to quickly connect lines without losing fluid or fluid pressure. Quick couplers are designed to be connected and disconnected immediately without the use of tools, eliminating the need to close valves, bleed the system, recharge with fluid, and/or purge entrapped gas when parts are disconnected and replaced.

Available Brands

Proex | Value

Tool Bag

Tool Bag

A tool bag is used to organize your tools easily and quickly.

Available Brands

CLC

Tube Expander

Tube Expander

A tool for expanding tubes.

Available Brands

Value

Mechanical Bender

Mechanical Bender

A tool for bending copper tubes.

Available Brands

Proex

Vibration Eliminator

Vibration Eliminator

A tool that eliminates vibration in a pipeline.

Available Brands

Packless